Problem Solvers - Bursting with Scores of hard to come by maintenance tips! That Magic Ingredient  The MUST have for every DIY enthusiast!  Probably The Most Amazing Property Maintenance Product Ever Found In A Can! 74 Little Known Secret Solutions To Your Most Costly, Frustrating Home Painting & Maintenance Headaches
353-1-830 22 50 353-1-830 22 50 top_icon_facebook Cart icon €0.00
  • Home
  • plastic polish, revives faded plastic, faded uPvc, faded paintwork
    € 0.00
    Price Excl. Vat @ 23%

    Owatrol Polytrol

    Share this
    Facebook Twitter Google Plus
    Size:

    Revives Faded Plastic, Fibreglass, Paint, Metal, Tiles in Minutes. 

    Photo shows both plastic and paintwork revived on an old car door.

    • Like a Plastic Polish restores the colour and appearance of dull and faded surfaces caused by exposure to sunlight, rain and pollution 
    • Deep penetrating oil that restores the original look and finish to gel coat, plastic, metal and other surfaces 
    • Protects against corrosion and blemishes
    • On bare metals Polytrol restores the shine and protects against corrosion  

    Properties

    • Revives the colour and appearance of tarnished and dulled plastics and fibreglass (GRP) (car bumpers, boat hulls, plastic garden furniture, shutters). 
    • Restores marble, tiles, tombstones, slate, terracotta tiles where the colour and look has faded. 
    • Rejuvinates and restores flat and chalky paint and varnishes dulled by weathering. 
    • Restores the shine and protects chrome or polished metals: aluminum, chrome, brass, bronze  


    Where to Use 

    • Treat small areas in stages to avoid an uncontrolled drying of the Polytrol. 
    • Avoid using Polytrol on hot surfaces or direct sunlight. 
    • Although Polytrol is not highly flammable, soaked rags should not be discarded as such directly to the trash (risk of self-ignition) leave cloth to dry first in open ventilated place.  


    Application 

    • Before using Polytrol plastic polish, always make sure the surfaces are dry, clean and free of grease, silicone. If cleaning is necessary, use a solvent on metal or use Net-Trol on plastics. Rinse well and allow to dry for at least 12 hours. Mask areas that are not to be treated. 
    • Carefully apply a layer of saturated Polytrol. Beware of runs (for sanding metal surfaces, use fine steel wool, well soaked with Polytrol). 
    • Leave on for 10-20 minutes then remove the excess product by wiping with a clean lint free or paper towel. 
    • Allow at least 24 hours before use. 


    Coverage: 18m²/l  

    Application tools : brush - cloth 

    Application temperature : +5°C to +35°C 

    Working time before wipe off : 10 to 20mn.

    Clean-up : White-Spirit

    Polytrol is available online here now. 1/2L, 1L & 250ml Aerosol.

    Facebook Twitter Google Plus
    Customers Also Bought these

    Related Articles

    How To Get Best Results From Aerosol Spray Paint

    How To Get Best Results From Aerosol Spray Paint

    Aerosol Spray Paint Is A Handy Way To Do Certain Small Painting Projects.

    Here Are a Few How To Guides & Tips To Help You Out.

    A Few More Useful Home Painting Tips

    A Few More Useful Home Painting Tips

    Painting Bits and Pieces Around The Home Can Be a Fun & Satisfying Thing.

    This Is Especially So When You Know The Smart Ways To Get The Best Results With The Minimal Effort & Cost.

    5 Useful Tips To Make Your Next Painting Project Easier.

    5 Useful Tips To Make Your Next Painting Project Easier.

    Proper preparation can make your final painting job easier and less expensive.

    Check out those 5 tips and save time & effort.

    New Way to Transform Dirty Faded Garden Furniture.

    New Way to Transform Dirty Faded Garden Furniture.

    Amazing, New Way to Transform Dirty Faded Garden Furniture.

    Here is a completely new way to transform your old garden table and chairs into ‘out of the box new’ looking again with minimal work, very low cost and it will last for years and years without peeling off.

    The expensive high quality teak garden set shown here was left out in a very exposed area beside the sea...  More...

    Tips For Restoring Vintage Tractors, Machinery, Cars, etc

    Tips For Restoring Vintage Tractors, Machinery, Cars, etc

    If you are into the vintage tractors or classic car restoration, you will already be well aware of the many challenges involved from seized parts, rusted bonnets and so on.

    This article deals with a selection of common problems that crop up on all vintage restoration work. The biggest one is rust. Also covered is the problem of seized up or tight bolts, cables and so on. 

    E-mail FacebookGoogle PlusLinkedInPinterestTwitterYouTube

    IGOE CONCRETE DIY