Shop Rust - CorrosionOwatrol CIP Corrosion Inhibiting Primer

Owatrol C.I.P. is a penetrating rust treatment and metal primer which accepts all paint types with minimal preparation.

€ 0.00
Price Excl. Vat @ 23%

Owatrol CIP Corrosion Inhibiting PrimerISSN: 3297972107876

Share this

Size:

Steel Primer For New or Rusted Surfaces. Ideal Over Owatrol Oil or applied direct for Two Pack Paints etc. Very popular with the vintage and classic car, vintage tractor fraternity for restoration. (Price shown is for .75L exc vat)

PROPERTIES.

Universal rust inhibiting primer for all paint types – Will not dissolve or break down when high solvent paints applied.
Penetrates and stabilises the surface, forming a solid stable layer that other coatings can firmly adhere to. Pigmentation offers increased protection and perfect film-forming qualities.
Easy to use, no need for sanding or sandblasting.
Use on new or rusted surfaces – interior and exterior. High temperature resistance up to 175 °c.

WHERE TO USE

C.I.P. (Corrosion Inhibiting Primer) is recommended for all severe environmental conditions: marine or tropical climates, corrosive fumes, protection of motor vehicles, construction equipment and ballast tanks of ships as well as everyday items i.e. railings, gates….

It is especially recommended for the protection of vintage or classic cars, tractors, machinery etc where cellulose or two part paints are used.
If the steel has bad, scaly rust, saturate that first with Owatrol Oil (also on this website) and after a few hours that scaly rust can be scraped off with the greatest of ease using an ordinary paint scraper etc. Please take a few moments to read about how the Owatrol Oil works on rust etc.
If you plan to paint using a strong solvent or 2 pack paint for finishing, you will need to apply a coat of CIP on top of the layer of Owatrol Oil. Reason being, those paints react if applied directly on top of a surface treated with Owatrol Oil.
Another great application for CIP is on new steel or sections you have welded together to replace old rusted parts etc.

The C.I.P. is especially recommended where a high resistant paint or two-pack finish (urethane, epoxy, chlorinated rubber, synthetic) is to be applied or necessary.

RECOMMENDATIONS BEFORE APPLICATION

Shake or stir paint well before and during use.
Do not dilute.
Remove all loose and flaking rust, mill scale and old paint back to a sound surface using a wire brush or scraper. It is not necessary to remove all firmly adhered rust.
Surfaces exposed to chemicals (salts, acids, alkalis, vehicle chassis etc...) should be washed with water or steam cleaned.
Severely contaminated surfaces should be cleaned using the appropriate solvent.
Before application, ensure surface is clean, dry and free from oil, grease and other surface contaminants.

RECOMMENDATION

With the C.I.P. sand or shot-blasted surfaces do not require immediate priming; a light rust coating will not affect its performance or the final result.

Information :

Coverage :15m²/l

Application tools : Brush - roller - conventional or airless spray

Application temperature :+5°C to +30°C

Drying :6 h.

Clean-up :White-Spirit

Technical Specification: TDS_Owatrol_CIP.pdf

Sds Sheet Health: MSDS_Owatrol_CIP.pdf

Owatrol

How To Stop Rust

Rust Has Been Around A Long Time.

Many Attempts Have Been Made To Cure It.

Lots Of Big Name Hype And Lots Of Big Claims...

The Most Reliable Solution Known To Date Was Accidently Discovered On Rusting Ships On The American Great Lakes During The Great Depression...

Tips For Restoring Vintage Tractors, Machinery, Cars, etc

If you are into the vintage tractors or classic car restoration, you will already be well aware of the many challenges involved from seized parts, rusted bonnets and so on.

This article deals with a selection of common problems that crop up on all vintage restoration work. The biggest one is rust. Also covered is the problem of seized up or tight bolts, cables and so on.

Shed Rust

Steel buildings (roofs and cladding) can become faded and tired looking.

You can refresh that building very easily and with minimal cost by using ordinary oil based paint and Owatrol Oil. Make sure it is clean of course. First coat with at least 25% Owatrol Oil mixed into the oil based paint of your choice. This will make the paint stick tight to the cladding. If a second coat is required, apply with just enough Owatrol Oil in it to make it flow out nice and even.

You should expect years and years from this method. Can be rolled, brushed or sprayed.

How Owatrol Oil Works on Rust

In May 2012 Terry Wheatley of picturesque Dublin seaside village Dalkey Tidy Towns Committee had the task of refurbishing all their various street poles which had become rusted and pitted despite regular applications of the usual paints.

“Nothing previously stopped the poles from peeling and rusting,” he said. He asked Igoe International if they had a solutions and the problem was solved quickly and cost effectively using Owatrol Oil in conjunction with standard oil based paint. After 36 months (time of this publication going to press) Terry reported that “the poles look virtually the same now as the day they were done, we’re very happy with it”. The system (Owatrol Oil used with OIL based paint) is suitable for all metal surfaces, steel, cast iron, even cast aluminium.

BARGE CONDENSATION PROBLEM

Boats of all shapes and sizes are becoming more and more popular with people who want to get away from it all. Boats bring their own unique joys and experiences. As applies to land based property, boats too need their share of looking after. In this section we have endeavoured to show you a broad selection of situations ranging from simple rowing boats, sailing boats to fancy yachts and even sailing ships. Some of the information can cross over to regular non-marine things such as wooden furni-ture, plastics etc so you may find it useful.

As’ good as it gets…

The ‘late’ Irish training sailing ship The Asgard has had its timbers protected and maintained for many years with Deks Olje D1 and D2. Primarily the masts, hand rails and wheelhouse.

Restoration

Latter day vehicles such as old cars, tractors, machinery, bikes, and other items of all kinds are of special interest to many people who treasure their ‘pet’ try to keep it in good shape, bring it to shows, meet their friends there etc.