News » Powerful New Paint Remover Now Available 2020-07-17

Announcing a new and fast way to remove paint or varnish from Owatrol... DSP800.

Developed and manufactured by Owatrol, DSP800 is proving to be a big success with home owners, DIY'ers and professional painter decorators.

Powerful, Fast Acting Stripper Capable Of Removing Both Single And Two Pack Paints.

Fast acting formula removes paint in as little as five minutes 

Dichloromethane (Methelene Chloride) Free

Gel formula does not run or sag

Surface can be recoated after just six hours

Suitable for car bodyshops, classic and vintage restoration.

DSP 800 is a powerful, ‘Dichloromethane’ free multi-purpose stripper, for the removal of all coating types – Alkyd, Acrylic, PU, Epoxy, Cellulose, RSE (semi-thick coating), RPE (thick plastic coating) and more. It is a very strong stripper that can even remove 2-Pack paints and powder coatings without damaging the substrate making it perfect for a wide range of  applications.

Fast acting and ready to use, DSP 800 works on all surfaces (except plastic), leaving a clean, coating free surface that can be refinished after just 6 hours. Containing no acid, caustic soda or potash, DSP 800 will not darken wood and thus requires no neutralisation after use.

Ideal Uses for Owatrol’s DSP 800 Stripper

• Removes car paint
• Strips interior and exterior wood surfaces
• Gets rid of unwanted carpet glue
• Strips paint from stone and cement walls

Useful Information Coverage:

1.25 – 4 m² per Litre (actual coverage will depend on the type of finish and numbers of coats being stripped and thickness of DSP 800 applied) Application

Tools: Synthetic brush, synthetic scrubbing brush, soft brass brush, scraper

Suitable for: Interior and exterior use

Clean Up: Warm water or white spirit

Average Working Times: (See directions for use tab)

Suitable Surfaces: Wood, metal (ferrous and non-ferrous – avoid prolonged use on aluminium), stone, cement, ceramic

Restrictions Do not use on plastics, GRP or other similar type surfaces – risk of dissolving surface. Avoid prolonged contact with aluminium.